Coronavirus Research, 

Some of are research seems to say that Coronavirus is linked to being an Nanorobtic in its make up, and acts like an retrovirus,

   coronavirus cell             anti coronavirus cell

we have made a quick drawing of a dowsed image,(anti coronavirus cell)  within it a broadcasting frequency has be made with these shapes

the hope is these frequencies connect to coronavirus and healing takes place ,

There is also others within are group who are researching creating spirals and columns of healing energy ...more to come

 High levels of Radon gas where the possible cause of cancer the  person has got living in this property

faults or fractures below the ground are the main factors,  but there are many other reasons

 

EXPLORING WAYS OF HOW TO CONTROL RADON GAS WITH DOWSING

Trials 

During the past six months I have been researching ways of how to control radon gas and to see if there was a way of deflecting or moving radon gas from a critical area to a safe area. Not always possible if there is heavy population or buildings but in some cases it is possible. My client has the latest technology machine which gives the readings of radon gas on the property and yes radon ags can go very high and go very low, it is never stable. What I wanted to try and do was to bring it down from a high reading to a low reading and within the safety margins that is recognised as safe and the challenge for me is to keep at a safe level at all times. To do this I have had to check the radon gas area firstly by remote survey of the site to see if there is radon gas at the property in question also to find out what symptoms may be occurring with the people living in the property to see if there is any connection. So far I have managed to move the radon gas from A to B but not far enough away so my trials are still on going and I am making further site visits.
 

UPDATE ON THE RADON GAS TRIALS JULY 2017:

The process for this particular client for the trials was a map survey creating a shield of protection around the property as previously mentioned above. This process seemed to work and reduce the radon gas numbers quite sharply but it did seem to come back again a few days later and the readings returned to be high again. I tried several methods creating two and three circle shields around the clients property and this actually showed that the figures dropped down to as low as zero before coming back up again with in a couple of days. It is like as if the radon gas was eating what I had done by remote map surveying creating this invisible shield of protection. 

The idea of it was to deflect the radon gas from the property and allow it to go around the property instead of through the property. So then I went on site and we used the old method of copper roads placed in the ground which was known to work in the past for moving energies and of course it did seem to work. We had to put over 450 of these rods in the ground. 

On site we had already marked the area of the radon gas and once the copper rods were placed in the ground they seemed to work and the radon gas moved on the outside of the rods instead of through the rods and the meter readings again dropped dramatically to safe figures. We checked the property and found that the radon gas was in the walls in certain areas but over several hours was weakening which meant that the radon gas was being deflected from the outside and inside walls of the building. I thought that that was finished with and it had worked. I had a back up plan in case in didn't work which was to intercept the radon gas upstream by digging a trench into the rock which meant digging through heavy clays to release the radon gas before it reached the property. We still have not done this but we have found the radon gas is still getting through because when the property was built they had broken through the heavy clays which was stopping the radon gas from getting through and accidentally released the radon gas. This I believe is the reason why in this particular case we cannot solve the problem because the radon gas is travelling through from the north to the south through the property and that the heavy clays were dug out right into the rock releasing the radon gas regardless of us creating the outer shield. 

I learned a lot from this experiment. It can still be sealed off but it has to be done inside the property and a membrane layer of protection needs to be laid down in the areas where the heavy clays were removed. This will be the only solution to this particular problem as the rock is bleeding out the radon gas. It is travelling through a fault from the north. Nobody was aware of this problem regarding radon gas in that particular area until I map surveyed the area and picked up the radon gas remotely and then it was confirmed on site using a meter reading of the radon gas.

 



This is what you need to know before your Proceed to Try and Control Radon Gas 

Before you venture on any projects like this you must make sure that you understand and read up and be trained on radon gas or detrimental energies so that you are fully aware of the risks and what causes radon gas and what can be done to protect your home and property. Once you have picked up the radon gas with your remote surveying and you have drawn it out with coloured crayons following your personal colour code ( you need to experiment what colour code suits you personally for dealing with radon gas via remote surveying) to yourself on the Google earth map you then go to the site and then mark it out with surveyor flags indicating the direction that it is going, where it is coming from and going to on the property, and also the width of the radon gas, this way we then know the direction it is taking. Very often the colour code affects the numbers and bringing the numbers down nearer to the safe region. Once this is completed we then have to find a way of intercepting the radon gas on site and deflect it from the building.

My trials are still ongoing but I am fairly confident that we will complete and find out the answer and reduce or deflect the radon gas from the property which would then help the health of the people living in it.

As far as I am aware no one has managed to succeed in moving the radon gas from area to another. 

Further updates will follow once the trials have been completed later this year and we are satisfied that we have managed to deflect the radon gas and push the boundaries of research. 

If anyone is interested in learning the art of geopathic stress and locating radon gas or changing or transforming detrimental energies from bad energies into energies I take teaching classes on this subject. Please contact me via telephone or email for further information. 

NEW YORK UFO?